Zeppelin FM II structural cross beams within walls

Moderator: Moderatoren

Antworten
Nachricht
Autor
Heering80
infiziert
Beiträge: 42
Registriert: 2013-05-22 19:50:08

Zeppelin FM II structural cross beams within walls

#1 Beitrag von Heering80 » 2014-05-20 14:24:02

OK, our project struggles on..

We got our Seitz S4 windows today, and I was wondering how they should be installed I ran into a small problem. I've read from these forums that there are structural cross beams inside Zeppelin FM II container, and that they should be situated 102cm from each end (measured from inside). And indeed, there seems to be something inside judging by the distortion in the reflecting light at that spot and the hotter surface temperature resulting from poorer insulation. But as I was thinking wether I should move our kitchen window left or right, I saw similar signs of hidden beams at 40 cm from the rear end of the container.

My question is: What's in there at that spot and does it ran from top to bottom. My guess is that there is something to support the ladders outside. Is it safe to make a cut at a spot that's not directly behind a ladder piece?

Riku

Benutzeravatar
Ulf H
Rauchsäule des Forums
Beiträge: 24366
Registriert: 2006-10-08 13:13:50
Wohnort: Luleå, Norrbotten, Schweden

Re: Zeppelin FM II structural cross beams within walls

#2 Beitrag von Ulf H » 2014-05-20 14:37:38

... there is double tin underneth the steps of the ladder ... there should bee no extra beam ...

Gruss Ulf
Ein Problem, welches mit Bordmitteln zu beheben ist, ist keines !!!

Hanomag, der mit dem vollnussigen Kaltlaufsound !!

Sisu (finnisch) die positivste Umschreibung für Dickschädel.

Da ist man ständig dran die Karren zu verbessern, schlechter werden sie ganz von alleine.

Magirus-Deutz 170D11FA ... Bild in Cinemascope extrabreit, Sound in 6-kanal Dolby 8.5 ...

Benutzeravatar
holger.ihle
süchtig
Beiträge: 686
Registriert: 2009-11-28 19:49:22
Wohnort: 61169 Friedberg

Re: Zeppelin FM II structural cross beams within walls

#3 Beitrag von holger.ihle » 2014-05-20 15:21:49

Hello,

the FM2 is designed for 5 to military use and You can stack it three times! I guess this will be some 7.5 to in commercial use. So I don't care about the beams. I cut my windows were I wanted them. If You damage Your container so that the windows will Pop out or the sidewall is bent - You will probably have ANOTHER BIG Problem!

rgds, Holger
Lebe Deinen Traum, träume nicht Dein Leben

Heering80
infiziert
Beiträge: 42
Registriert: 2013-05-22 19:50:08

Re: Zeppelin FM II structural cross beams within walls

#4 Beitrag von Heering80 » 2014-05-20 21:22:03

What kind of a tool are you referring to when you say "you cut something out with a Flex"? Is it an angle grinder or a reciprocating saw (säbelsäge) or what? It seems to me that Flex is only a trade mark :)

Odd problems can one bump into..

Benutzeravatar
Wilmaaa
Forenteam
Beiträge: 19456
Registriert: 2006-10-02 9:50:27
Wohnort: 35519 Rockenberg
Kontaktdaten:

#5 Beitrag von Wilmaaa » 2014-05-20 22:29:13

Flex is an angle grinder :)
Ich hab einen Virus: den H-A-N-O-M-A-G-I-R-U-S
-----
"Frauen haben in der Küche nichts zu suchen. Sie müssen sich um die Schweine kümmern und den Traktor schmieren." (Charlotte MacLeod)
-----
"Das ist also ein Kleinbus und ein LKW in einem." (Mitarbeiterin über den 170er)

Benutzeravatar
Der Bootsbauer
süchtig
Beiträge: 901
Registriert: 2009-03-28 14:41:47
Wohnort: Regensburg
Kontaktdaten:

Re: Zeppelin FM II structural cross beams within walls

#6 Beitrag von Der Bootsbauer » 2014-05-20 22:32:35

Yes, Flex is the trade mark of the inventer of the angle grinder, so in germany every angle grinder is called "flex".
"Wer alle Beiträge liest, der verschafft sich einen unfairen Vorteil!" (tauchteddy)

Benutzeravatar
steyrer
infiziert
Beiträge: 84
Registriert: 2012-05-09 10:01:13

Re: Zeppelin FM II structural cross beams within walls

#7 Beitrag von steyrer » 2014-05-21 7:08:47

Not only germany. In austria itis also called "Flex"!

regards

Dominik

Heering80
infiziert
Beiträge: 42
Registriert: 2013-05-22 19:50:08

Re: Zeppelin FM II structural cross beams within walls

#8 Beitrag von Heering80 » 2014-05-21 7:52:10

Ok that's what I thought, funny! In Finland everybody knows it by the name "rälläkkä". Don't have a slightest idea where that comes from, though..

Benutzeravatar
Wilmaaa
Forenteam
Beiträge: 19456
Registriert: 2006-10-02 9:50:27
Wohnort: 35519 Rockenberg
Kontaktdaten:

Re: Zeppelin FM II structural cross beams within walls

#9 Beitrag von Wilmaaa » 2014-05-21 9:38:35

At least it sounds nice. The word, I mean :D
Ich hab einen Virus: den H-A-N-O-M-A-G-I-R-U-S
-----
"Frauen haben in der Küche nichts zu suchen. Sie müssen sich um die Schweine kümmern und den Traktor schmieren." (Charlotte MacLeod)
-----
"Das ist also ein Kleinbus und ein LKW in einem." (Mitarbeiterin über den 170er)

Antworten