MD bolt pattern and Trilex wheels

alles, was nicht in die übrigen Technik-Kategorien passt

Moderator: Moderatoren

Antworten
Nachricht
Autor
wilco
neues Mitglied
Beiträge: 28
Registriert: 2013-06-07 18:55:30
Wohnort: Indiana ,usa

MD bolt pattern and Trilex wheels

#1 Beitrag von wilco » 2013-06-13 0:19:22

1978 Magirus Deutz D17 FA ALLRAD

What is the bolt pattern? 10 X ??? and the center opening size? 280mm?

What is the largest tire that anyone has put on a 8.5 X 20 Trilex?

Benutzeravatar
CoDa
Selbstlenker
Beiträge: 180
Registriert: 2012-08-10 15:55:31
Wohnort: am Chiemsee

Re: MD bolt pattern and Trilex wheels

#2 Beitrag von CoDa » 2013-06-13 8:41:15

Hallo,

Trilex-Dimenisions

Grüße Cord

Benutzeravatar
Pirx
Säule des Forums
Beiträge: 17801
Registriert: 2006-10-04 20:03:38
Wohnort: Raum Stuttgart
Kontaktdaten:

Re: MD bolt pattern and Trilex wheels

#3 Beitrag von Pirx » 2013-06-13 11:12:06

wilco hat geschrieben:1978 Magirus Deutz D17 FA ALLRAD

What is the bolt pattern? 10 X ??? and the center opening size? 280mm?

What is the largest tire that anyone has put on a 8.5 X 20 Trilex?
Hello wilco,

the bolt pattern is 10 x 335 mm. The center opening size is 281 mm.

But you need not stay with the TRILEX rim system. As I could see on one of your photos of the truck, it does not have the "real" TRILEX rims. It has the TRILEX adapter rims. This means, you can throw them away and use just every common truck rim with the above 10 bolt pattern.

Pirx
Der mit der Zweigangachse: 15 Vorwärtsgänge, 3 Rückwärtsgänge, Split, Schnellgang, Differentialsperre
---
"Immer bedenken: Hilfe ist keine Einbahnstrasse, Geholfen-Werden ist kein Recht und es liegt an jedem selbst, inwieweit er sich hier in der Gemeinschaft (die im Extremfall so einiges gemeinsam schafft) involviert und einbringt."
Ein Unimog-Fahrer.

wilco
neues Mitglied
Beiträge: 28
Registriert: 2013-06-07 18:55:30
Wohnort: Indiana ,usa

Re: MD bolt pattern and Trilex wheels

#4 Beitrag von wilco » 2013-06-14 0:41:23

every common truck rim with the above 10 bolt pattern.

They have a 281 mm center opening??

wilco
neues Mitglied
Beiträge: 28
Registriert: 2013-06-07 18:55:30
Wohnort: Indiana ,usa

Re: MD bolt pattern and Trilex wheels

#5 Beitrag von wilco » 2013-06-14 0:42:17

THANK's FOR ALL THE HELP!!!!!!!!

Benutzeravatar
Pirx
Säule des Forums
Beiträge: 17801
Registriert: 2006-10-04 20:03:38
Wohnort: Raum Stuttgart
Kontaktdaten:

Re: MD bolt pattern and Trilex wheels

#6 Beitrag von Pirx » 2013-06-14 9:57:32

wilco hat geschrieben:every common truck rim with the above 10 bolt pattern.

They have a 281 mm center opening??
Should be an international Standard. If not, just enlarge the diameter of the center opening, as some of the guys here did with russian rims that obviously do not comply with that standard.

Pirx
Der mit der Zweigangachse: 15 Vorwärtsgänge, 3 Rückwärtsgänge, Split, Schnellgang, Differentialsperre
---
"Immer bedenken: Hilfe ist keine Einbahnstrasse, Geholfen-Werden ist kein Recht und es liegt an jedem selbst, inwieweit er sich hier in der Gemeinschaft (die im Extremfall so einiges gemeinsam schafft) involviert und einbringt."
Ein Unimog-Fahrer.

Antworten